ZTS Mini MBT Battery Tester

More Views

ZTS Mini MBT Battery Tester

Be the first to review this product

Availability: In stock

High tech pulse-load technology
Accurately check remaining battery power
Simple operation with LED readout

 

Place your order now and it will leave our warehouse 
Friday 18th August 2017

£52.95

Details

The ZTS Mini Multi Battery Tester is perfect for assessing the remaining capacity of your disposable CR123 lithium torch batteries and matching batteries in multi cell applications. The tester can also show the state of charge of Ni-mh and alkaline AAA, AA, C and D cells and is suitable for a wide range of applications including:

Security, Safety, Photographic, Remote controls, Smoke detectors, Medical appliances plus many others.

- Features

- Easy to use - no switches or settings
- Quickly and easily identify weak or failing atteries
- Patented high accuracy pulse load test
- Made in USA

- Battery Compatibility list

1.2v NiMH / NiCd rechargeable [AA, AAA, C, D]
1.5v alkaline [AA, AAA, C, D, N]
3v cylindrical lithium [CR123, CR2]
3.6v Li-Ion rechargeable [18500, 17650, 18650, RCR123A]
9v alkaline & carbon zinc

- Specifications

- Power supply - 4 x AAA batteries (Free GP alkaline batteries supplied)
- Display - 5 LED's, green, yellow, red
- Pulse load varies according to battery type
- Microprocessor controlled test cycle
- 2 seconds test duration
- Contacts - Solid brass, nickel plated
- Dimensions - 4 x 2.5 x 0.75 inches
- Weight - 3 oz (85g)

(Ni-mH battery testing)
In order to determine whether tested batteries good but simply discharged, or bad batteries that are no longer capable of taking a full charge, the operator must have knowledge of when the battery was last charged.
It is recommended that Ni-mH batteries are fully charged before testing (if possible, let the batteries sit off the charger for at least one hour prior to testing).
A good battery that has been fully charged should test at 100%. Batteries that are aging or are no longer capable of taking a full charge will test lower even after fully charging, for example 40%, 20% etc.

For devices that use multiple batteries, it is good policy to verify that all the batteries in the set are matched in capacity/charge. For example, don't mix 80% batteries with 20%.

When testing batteries, make sure to make good electrical contact during the test cycle. ZTS recommend holding the negative probe vertically and pressing firmly straight down onto the battery during the entire load test (while LEDs are 'running').

Please note image 1 shows the new updated version of the ZTS Mini MBT the other images are of the older version but are there to demonstrate the test method.

Specification

Brand ZTS
Further Info Operation:

1) Place battery (+) firmly on the appropriate tester terminal:

2) Hold probe tip firmly on battery (-) to begin automatic pulse load test:

3) Tester indicates remaining battery capacity on LED display
Retail packaged ZTS Mini MBT Pulse Load Battery Tester (New Updated Version)

Write Your Own Review

You're reviewing: ZTS Mini MBT Battery Tester

Order online or by phone
02921157162