Fenix HP16R Multi Beam Headlamp

Fenix HP16R is a versatile, light weight 1250 lumen outdoor headlamp that is ideal for work, walking, climbing, camping, running and every day use. HP16R is powered by the supplied 3000 mAh lithium polymer battery or can use 4 x regular AA alkaline or AA / NiMH rechargeable batteries. This powerful Fenix head torch features 3 beams with a choice of lighting from low level to high power, near or far.

Main and flood beams feature their own independent switches and can be used individually or combined to provide the perfect light setting for any task. The primary beam with its spotlight and spill lighting, illuminates both near and far simultaneously, avoiding trip hazards when walking or running. Both beams can be used together, combining the close-in flood beam with extra reach from the main beam to reduce the need to regularly adjust your lighting in mixed environments. The secondary 5 lumen red flood is ideal for map reading and protecting your night vision when only a little light is needed. All LED's feature a memory mode that will activate the light in your last used setting, ideal for sensitive environments.

The Fenix HP16R head unit features a die cast aluminium main body with internal heat sink, transferring heat from the LED to the large surface area outer casing for efficient cooling and long service life at high power settings.The head unit weighs only 75 grams, with a separate, light weight rear mounted battery box for even weight distribution and comfortable wear over long periods.

The battery box features a modern USB-C socket to charge the supplied Li-Po battery in just 3 hours, using your 2A mobile phone charger or similar. If power runs out, simply lift the quick release aluminium clasp to open the battery door, remove the Li-Po battery and insert 4 x universally available AA batteries and keep your adventure going.

Fenix HP16R performance:

Main beam:

The main 1600 lumen LED and reflector provide a balanced combination of far reaching spot and area spill light, lighting near and far. Safe illumination for a multitude of tasks.

Low - 50 lumens (36 hrs) - 52m beam
Med - 150 lumens (12 hrs) - 88m beam
High - 400 lumens (8 hrs) - 149m beam
Turbo - 1250 lumens max (4 hrs) - 255m beam

Pure flood beam with no distracting hard edges:

* Low - 5 lumens (300 hrs) - 6m beam
* Med - 150 lumens (12 hrs) - 30m beam
* High - 400 lumens (8 hrs) - 48m beam

Combined beams:

Combine main and flood beams to create your ideal beam profile. For example, 150 lumens close in flood lighting combined with 50 lumens, 59 meter main beam. Work in close yet have a little extra reach without adjusting the headlamp.

Red beam:

Protect your night vision or set up an SOS signal with the low level red beam.

Red - 5 lumens (300 hours) - 6m beam
Red SOS - 5 lumens (600 hours - 25 days !) - 6m beam

Fenix HP16R headlamp features:

* High CRI pure flood LED (4500k / CRI 75) retains the beauty of vivid natural colours
* Reflective strips on battery box rear for added visibility
* 2m impact tested for durability
* 60 degree tilt mechanism for ideal beam alignment
* Dual lock out (electronic and plastic cover) to prevent accidental activation during transport
* IP66 weather proof for all outdoor conditions
* Wide operating temperature of -35 to + 45 Deg C
* Helmet attachment hooks supplied

Operation:
* General switch: for on/off and output selection on General mode.
* Functional switch: for on/off and output selection on Functional mode.

On/off
Press and hold either of the switches for 0.5 seconds to turn on/off the lamp.

Output Selection
General mode - Main Beam: Single click the general switch to cycle through Low→Med→High→Turbo of spotlight.
AA batteries output selection: Low→Med→High→Med→Low→Med→High concurrently (Main beam Turbo output and combined beams are unavailable when running on AA batteries)

Functional mode - Flood Beams: Single click the functional switch to cycle through Low→Med→High→Red Light→Red Flash.

Intelligent Memory Circuit
The headlamp memorizes the last selected output. When turned on again the previously used output will be recalled.

Lockout Function
Lock: when the lamp is switched off, press and hold either of the two switches, or simultaneously press the two switches for 3 seconds, the lamp
will blink red three times to indicate locked status.

Unlock: when the lamp is locked, simultaneously press the two switches for 3 seconds, the lamp will be activated with 3 one-second red blinks and activated
on Red Light.

In locked status, clicking or pressing the switches will activate 3 one-second
red blinks to indicate locked status.

Please note that extended use of high output settings will reduce overall run times.

A high quality product in design, construction and operation, Fenix HP16R is built for your outdoor adventures.

For full product details please refer to the user manual in the images area.